Name: Autoclaved Aerated Concrete AAC Production Line AAC Plant
Equipment Picture
Overview
Project Proposal of AAC Production Line AAC Plant Annual out put 50,000-300,000m3 I Production Technique 1. Product Principle 1) Technology Orientation Production and application of aerated concrete has a history more
than 40 years in China. Viewing from technology point, high quality
products can use 3mm special sand slurry technology to meet the
construction requests and 50% energy saving goals. (When mortar
joint is less than 3mm, take thermal conductivity coefficient of
wall as 1; when mortar joint is more than 3mm, take thermal
conductivity coefficient of wall as 1.5). Based on the history of
the aerated concrete development, only high quality products can
bring a prosperous market. Thus, the technology orientation of this
scheme is high-class products according to China Standard
GB11968-2006. 2) Production Capacity The product is aerated concrete block and the output is 150,000m3
per year. The first phase can be equipped according to 100,000m3
per year. There is a reservation of plate in consideration of
user's need. 3) Product Specification Products conform to requirement of 04~07 grade blocks stated in
GB11968-2006. General Specifications of Aerated Concrete Blocks
Working Principle
Technical Parameter
The formulation of aerated concrete of 600kg/m3 absolute dry volume
weight is: SandQuick LimeCementGypsum = 6820102 Aluminum accounts for 0.074% of the total volume of dry materials; Ratio of water to material: 0.6~0.65.
ApplicationRange
Autoclaved Aerated Concrete AAC Production Line AAC Plant used for
products of AAC.
Operation Instruction
One-shift production may be put into practice when piecework system
is carried out in the enterprise, but working hours must be
prolonged and workers of the shift must be increased, and also
labor protection should be done well. If four autoclaves are
arranged in Phase One, fixed persons are organized in one shift.